klover STYLE 140 - Page 23

STYLE 140, STYLE 180, STYLE 220 PELLET STOVE
21
EN - Rev. 1.2
Set
1
2 5
6
3 4
The meanings of the status signals appearing on the top right side of the display are described below (2nd LED
SERIES).
- LED 1: the LED lights up when the daily programme of the on off settings is active.
- LED 2: the LED lights up when the weekly programme of the on off settings is active.
- LED 3: the LED lights up when the weekend programme of the on off settings is active.
- LED 4: the LED lights up (flashing) when the operation parameters are being edited.
- LED 5: the LED lights up when the summer function is active.
- LED 6: the LED lights up when the winter function is active.
- LED 7: the LED is not currently used.
The following diagram shows the display when setting or programming operating parameters.
The INPUT area shows the entered programming values.
The MENU LEVEL area shows the current parameter/menu level.
The DIALOGUE area displays the meaning of the current parameter/menu.
The table explains how the buttons on the display work.
KEY
DESCRIPTION
MODE
ACTION
1
Increase temperature (1)
Programming mode..
Changes/increases the value of the selected menu
item.
Working/off..
It increases the temperature of the room/water
thermostat.
2
Decrease temperature (2)
Programming mode..
Changes/decreases the value of the selected menu
item.
Working/off..
It decreases the temperature of the room/water
thermostat.
3
Set
-
Enters the menu in question.
Menu mode..
Accesses the next level of sub-menus.
1
2
3
4
5
6
7
INPUT
DIALOGUE
MENU LEVEL
On
M - 2 - 2 - 01
TIMER
DAY