20412955
8-2012/Rev 08
5-1
SECTION 5
LOW PRESSURE WATER SYSTEM
5.1 Overview
The SL-V series utilizes two low pressure circuits: cutting water supply and cooling water supply.
This section will discuss the cutting water supply circuit. See Section 6, Recirculation System,
for a detailed explanation of the cooling water supply circuit.
The cutting water supply circuit supplies the intensifier with the required cutting water flow and
pressure. System components include the inlet water solenoid valve, strainer, booster pump, and
the low pressure filter assembly. Pressure and temperature switches, connected to the PLC,
monitor out of tolerance conditions in the cutting water circuit and provide automatic shutdown
protection.
Figure 5-1: Cutting Water Supply Circuit
To Next Page
Loading...
Need help?
General
