404G2 SERIES TRACTOR OPERATION MANUAL
34
Left and Right Turn Indicators (Green)
Left and right turn indicators lights when left or right indicator
lamp is lit.
Brake Indicator (Red)
Brake indicator lights when brake is depressed. At one time, the
brake lamp will light.
PTO Monitor Indicator for 540 rpm
Indicates the state of the PTO shaft as follows:
–If the monitor glows, the PTO shaft is rotating at speed of 540 rpm.
PTO Monitor Indicator for 1000 rpm
Indicates the state of the PTO shaft as follows:
– If the monitor glows, the PTO shaft is rotating at speed of 1000 rpm
Electrical preheat Indicator
When ignition switch is on ‘Preheat’ position, thi indicates is working.
Headlight Indicator and Tail Lamp Indicator
Headlight Indicator should glow when Headlight switch is switched
to beam position.
Tail Lamp Indicator should glow when Tail Lamp switch is switched
to beam position.
3、Combination Switch：
Fig.4-5 Combination switch
1. Turn indicator switch
2. Horn switches
3. Main beam switch
Turn indicator switch 1 is used to switch on the right or left turn indicator lamp. Turn
switch 1 clockwise to switch on right indicator lamp. Turn button 1 counterclockwise to
switch on the left indicator lamp. Turn indicator switch is not functional when hazard
warning signals flashing.
Switch off hazard warning signal with hazard warning switch before operating turn
To Next Page
Loading...
