404G2 SERIES TRACTOR OPERATION MANUAL
35
indicator switch.
Push down horn switch 2 to swith on horn. The button 2 will return to initial postion
after releasing.
Turn main beam switch 3 to control the main beam lamp.
4、Switch plate：
Fig.4-6 Switch plate
1. Hazard-warning signal Switch
2. Rear Work Lamp Switch
(1) Hazard-warning signal switch
It is only used to switch ON the hazard-warning signal.
Hazard-warning signal should light when tractor should be
repaired on road or running in night. “1” is ON position.
(2) Rear Work Lamp Switch
It is only used to switch on the rear work lamp. “1” is ON
position. Rear work lamps are installed on left and right
fenders.
Fig.4-7
1. Rear Work Lamp
0
1
1
0
To Next Page
Loading...
