2
TABLE OF CONTENTS
Safety Information..........................................................................................3
Compressor Requirements............................................................................2
Package Contents.........................................................................................9
Product Specifications...................................................................................3
Preparation...................................................................................................10
Spray Gun Set-up.........................................................................................10
Operating Instructions..................................................................................12
Assembly Instructions..................................................................................11
Care and Maintenance.................................................................................15
Troubleshooting............................................................................................19
Warranty.......................................................................................................23
COMPRESSOR REQUIREMENTS
3.7
SCFM
29
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
IMPORTANT: To operate correctly, this tool requires airflow of at least 3.7
cubic feet per minute (SCFM) at 29 pounds per square inch (PSI) at the tool.
Check the specifications of your air compressor to be sure that it can support
both the minimum SCFM and PSI required. The air hose length could affect
how much air pressure the tool is actually receiving. You may need to adjust
the air pressure higher on the air regulator to achieve the max working
pressure of 29 PSI.
To Next Page
Loading...
Need help?
General
