Kobalt 0192525 User Manual

2
Safety Information
............................................................................................... 3
Product Specifications
......................................................................................... 3
Compressor Requirements
................................................................................. 2
Package Contents
............................................................................................... 9
Preparation / Pre-Assembly Instructions
Air Supply Set-up
.............................................................
10
................................................................................................. 10
Operating Instructions ......................................................................................13
Care and Maintenance........................................................................................
15
Troubleshooting
................................................................................................... 19
Warrant
y
............................................................................................................. 22
Exploded View
....................................................................................................
23
3.7
CFM
29
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
COMPRESSOR REQUIREMENTS
IMPORTANT: To operate correctly, this tool requires airflow of at least 3.7 cubic feet per
minute (CFM) at 29 pounds per square inch (PSI) at the tool.
Air hoses may cause loss in pressure up to 15 PSI, requiring a higher compressor output to
compensate and maintain required pressure at the tool. Check the specifications of your air
compressor to be sure that it can support both the CFM and PSI required by this specific tool.
TABLE OF CONTENTS

Kobalt 0192525 Specifications

General

Brand	Kobalt
Model	0192525
Category	Paint Sprayer
Language	English