kobalttools.com
12
V
OPERATING INSTRUCTIONS
1. Place one hand on the trigger handle (L). Place the
other hand on the auxiliary handle (E).
2. Press the lock-out button (F) toward the handle and
hold.
3. Squeeze the trigger switch (G). The hedge trimmer will
turn ON.
4. Release the lock-out button (F). The hedge trimmer
will stay on as long as the trigger switch (G) on the
trigger handle (L) is squeezed ON.
5. The hedge trimmer will stop if you release the trigger
switch (G).
IMPORTANT:
If the hedge trimmer is accidentally dropped, the unit will turn off and the blades
will coast to a stop. The hedge trimmer will then be locked off.
On/Off Switches
The hedge trimmer has one switch control and a
lock-out button used together to prevent accidental
start-ups or injury.
2
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or re:
• Replace the battery or the charger immediately if the battery case or charger cord is damaged.
• Verify that the trigger switch is in the OFF position before inserting or removing the battery.
• Verify that the battery is removed and the trigger switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the hedge trimmer.
• Read, understand, and follow the instructions contained in the charger manual.
G
E
F
L
To Next Page
Loading...
Need help?
General