To Next PageTo Next Page
Need help?Do you have a question about the Kobalt KMS 0724B-03 and is the answer not in the manual?
Instructions for unpacking and checking parts, includes safety warning.
Eye protection, dust inhalation, tool usage, and instruction reading.
Tool servicing by qualified technician and reading all instructions.
Explanation of tool symbols and general power tool safety guidelines.
Safety tips for the work environment and electrical precautions.
Personal safety measures and guidelines for using and maintaining the power tool.
Battery tool care, service guidelines, and miter saw specific safety.
Continued safety advice for miter saw operation, covering workpiece handling and cutting.
Extra safety warnings specific to miter saw operation, including blade use and tool condition.
Introduction to the miter saw's purpose, safe use, and features.
Caution against carelessness and list of required tools for adjustments/installation.
Warnings about parts and secure mounting, plus steps for mounting the saw.
Instructions for attaching carrying handle, dust port, and using work clamp.
Procedures for locking and unlocking the saw arm for safe operation.
Battery tool warning and steps to square the blade to the fence.
Adjusting miter/bevel indicators and squaring the blade to the table.
Adjusting the bevel-angle indicator and setting blade to miter table at 45°.
Adjusting miter-control lever tension and pivot points for smooth operation.
Safely transporting the saw and performing pre-operation safety checks.
Instructions for attaching, detaching, and managing the battery pack.
Procedures for changing the saw blade and the importance of the blade guard.
Adjusting sliding fence, setting cutting depth, and using the LED work light.
Operating the power switch and performing chop cuts.
Instructions for performing slide cuts and crosscuts.
Safety warnings and further details for crosscutting operations.
Instructions for performing bevel cuts on the miter saw.
Detailed instructions for bevel cutting and performing compound miter cuts.
Further instructions and considerations for compound miter cuts.
How to cut grooves using the depth adjustment feature and practice cuts.
Techniques for cutting warped material and base molding.
General advice and specific setups for cutting crown molding.
Specific method for cutting crown molding against the fence for various corners.
Instructions for cleaning the tool and lubricating key components.
Steps to resolve when the tool does not operate due to low battery.
Steps to resolve blade binding, jamming, burning, or vibration.
Information on the 5-year limited warranty coverage and return policy.
General