Kobalt KSP 2040-06 - Assembling the Battery Pack

9
ASSEMBLY INSTRUCTIONS
3. ASSEMBLING THE BATTERY PACK
• Open the battery door (C).
• Align the lift ribs on the battery pack with the grooves in the battery compartment.
• Push the battery pack into the battery compartment until the battery pack locks into place.
• When you hear a click, the battery pack is installed.
4. REMOVING THE BATTERY PACK
• Open the battery door (C).
• Push and hold the battery release button.
• Remove the battery pack from the machine.
3
Battery pack
Battery
release button
C
4
Battery pack
Battery
release button
C