10
SAFETY INFORMATION
kobalttools.com
WARNING
• Use the proper extension cord. Make sure to use an extension cord that is heavy enough to carry
the current required by the tool. An undersized cord will cause a drop in line voltage, resulting in loss
of power and overheating of the tool.
• Use the extension cord only for intended purpose. DO NOT pull the extension cord to remove it from
the power socket.
Recommended size for extension cords
Amperage Rating of the Tool
(120 V Circuit Only)
Total Length of the Extension Cord
25' (7.6 m) 50' (15.2 m) 100' (30.5 m) 150' (45.7 m)
MORE THAN NOT MORE THAN MINIMUM GAUGE FOR THE EXTENSION CORD (AWG)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not recommended
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Tools Required for Assembly (not included): 8mm wrench, Phillips screwdriver
To Next Page
Loading...
Need help?
General