16
CARE AND MAINTENANCE
To properly maintain and keep your sprayer working at its optimal
performance, it is strongly recommended that the spray gun nozzle be
cleaned and cleared of any clogs or debris using recommended cleaning
solutions such as Mineral Spirits, Paint Thinner or Lacquer Thinner. Consult
with your local retailer in choosing the right clean solution for the material you
are using.
DO NOT USE ACID BASED SOLVENTS, AS ACID BASED SOLVENTS
CAN DAMAGE THE SPRAYER.
ALWAYS REMOVE THE AIR SUPPY FROM THE SPRAY GUN PRIOR TO
PERFORMING ANY CLEANING OR MAINTAINENACE.
KEEP AWAY FROM ANY IGNITION SOURCES.
ALWAYS WEAR PROPER PPE WHILE CLEANING OR PERFORMING
MAINTENACE ON THE SPRAY GUN.
NEVER SUBMERGE THE SPRAY GUN HOUSING INTO SOLVENT
MATERIAL.
WARNING
Cleaning Instructions
1. Remove the air supply from the spray gun.
2. Unscrew the Lid (I) from the Paint Cup (H)
and empty any remaining paint back into
the original container.
1
2
H
I
Unscrew
To Next Page
Loading...
Need help?
General
