KOCOM KHV-446ST - Security and Accident Prevention; Operation in Fire; Operation in Gas Leakage; Operation in Emergencies

24_www.kocom.com Security Home Auto System_25
Security and Accident Prevention (KHV-446S/446ST/456S/456ST)
 Operation in Fire
When a fire takes place, fire-alarming sound is heard
(Fire LED is turned on).
The number of house where a fire takes place is
displayed at guard and call signs is heard.
alarming sound
alarming sound
alarming sound
 The number of house where alarming sound occurs
is displayed at guard and call signs is heard.
The number of house where alarming sound occurs is
displayed at guard and call signs is heard.
 Operation in Gas Leakage
In gas leakage, gas leakage alarming sound is heard
(Gas leakage LED is turned on)
 Operation in Emergencies
When an emergency occurs at house, press the
emergencybutton (Emergency LED flickers)
emergency
 Setting the Security Mode 1 and Operation in Unlawful Entry by Thief
Pressing the "s 1" button, security mode 1 works
(S 1 LED is turned on).
When security sensor 1 detects an invasion, s 1 LED
flickers and alarming sound is heard at guard for notice
of unlawful entry by thief.
 Setting the Security Mode 2 and Operation in Unlawful Entry by Thief
Pressing the "s 2" button, security mode 2 works
(S 2 LED is turned on).
When security sensor 2 detects an invasion, s 2
LED flickers and alarming sound is heard at guard
for notice of unlawful entry by thief.
 Setting the Security Mode and Operation in Unlawful Entry by Thief
Just when "s 1" or "s 2" button is pressed, if
sensors are not connected or door is being open, the
equipment only sends the concerned alarming sounds without
setting security mode.
If security mode cannot be set, user should close the
door where sensor is attached in order to set security
mode.
For infrared detector, remove the moving objects from
surroundings of detector before setting security mode.
S 1
s 2
s 1, s 2 s 1, s 2
fire
gas