Push a family number and #button.
Push the password and #button, the common gate is opened.
In case of wrong password, the common gate is not opened, and only . . .. is twinkled.
Ex) Family No. : 1015
Password : 1234
In case of
wrong No.
Open the common gate at KLP-1000
You can call to KLP-1000 at KDP-205. In first, you pick up the handset of KDP-205 and
push the door key button in KDP-205.
The melody sound is simultaneously occurred at KLP-1000 and KDP-205, and the lamp
in KDP-205 is power on.
After about 3~4seconds, the melody sound is stopped. And able to communicate between
KLP-1000 and KDP-205 The KLP-1000 display pannel during communication.
If You push Door key button when communicate with KLP-1000 at KDP-205, the common
gate will be opened
If You want to stop communication between KLP-1000 and KDP-205, hang up
the handset in KDP-205 or push the “ “ button in KLP-1000.
If You call to KLP-1000 again, wait for about 5seconds when stopping communication
Calling to KLP-1000 at householder
Door open calling to KLP-1000 at householder
7 8
5. How to operate(Instruction for operating)
Call to each family at KLP-1000
For Visitor
For Householder
Push a family number that you want to reach at KLP-1000, and you can see it at display .
Call to KDP-205 4-5 seconds later after pushing a family number.
If you want to cancel call out, push the button. And then, you have to put into new
family number after twinkling LED.
Ex) Family No. : 1015
Please keep in mind polarity when install wiring.
If you call to KDP-205 at KLP-1000, the melody sound is occurred at KDP-205.
When you pick up the handset of KDP-205, lamp is power on and stop the melody sound. And
then, it begins communication between KLP-1000 and KDP-205.
If you push the door key button when communicate between KLP-1000 and KDP-205, the
common gate will be opened.
DOOR
KEY
Communication between KLP-1000 and KDP-205 & Door Open
Communicate with KDP-205 at KLP-1000.
Push the ##0#, and the display of KLP-1000 is twinkled.
Push the password as four numbers after 5 seconds when display twinkle stops,
and push #button.(Within 5 seconds)
Stop communication between KLP-1000 and KDP-205.
Ex) Family No. : 1015
Password : 1234
Registration of password at KLP-1000