Opening the Boxes
6–2 INSTALLING THE UNIT
Opening the Boxes
To unpack the boxes, follow the instructions for each box.
Opening the Head Assembly Box
Before opening the head assembly box make sure that you have the required tool.
To open the head assembly box, follow these steps:
1. Remove the upper cardboard from the packaging and lift off the packaging carton. DO
NOT cut through the cardboard. Remove the upper box (A).
2. Remove the upper cardboard of the lower box (B). Remove with the help of 3 persons the
Unit head transport pallet and place it on the ground. Remove the other component boxes.
3. Release the 4 screws securing the metal transport trolley frame to the pallet. Place the
transport trolley with the Unit head at the side of the pallet. You can now safely transport
the Unit head.
A
B
To Next Page
Loading...