Installing the Unit
6–8 INSTALLING THE UNIT
Installing the Fixed Arm
To install the fixed arm, follow these steps:
10. With the help of 2 persons, lift the fixed arm and attach it to the column with 4 screws with
washers (A), but do not tighten. Use the level adjustment screw (B) and the spirit level (C)
to correctly position the fixed arm; then, tighten the 4 screws with washers (A).
The Unit is now ready for the general wiring connection.
10
A
C
B
x4
B
6 mm
x1
To Next Page
Loading...