Installing the Unit
6–10 INSTALLING THE UNIT
line filter.
• Connect cable 23 to J9 (D) of the CJ653 board
Connect the cables on the fixed arm to the head in the following order:
• Connect cable 5 to J6 (E) of the CJ699 board.
• Connect cable 1 to J3 (F) of the CJ732 board.
• Connect cable 4 to J19 (G) of the CJ732 board.
Connect the cables on the left side of the column to the head in the following order:
• Connect cable 12 to J8 (H) of the CJ732 board.
• Connect cable 36 to J5 (J) of the CJ699 board.
• Connect the Ethernet cable (K).
• Connect cable 37 to J8 (L) of the CJ699 board.
The Unit is ready for the post-installation control.
To Next Page
Loading...