11
OPEN
2
3
1
4
2. Insert the film cassette
completely into the
FILM
CHAMBER
(21).
• Make sure the Film Status
Indicator (FSI) on the film
cassette is at ● (#1 position)
for a new cassette.
• Do not force the film
cassette into the film chamber.
3. Close the film door to start
the auto-film advance. The
FRAME
COUNTER
(28) on the
LCD
PANEL
(6) will show the
number of frames remaining
on the film cassette.
• After you close the safety-
interlocked film door, you
cannot open the door until
the film is completely rewound
into the film cassette.
To Next Page
Loading...
