27
UNLOADING THE FILM
Automatic rewind
The camera automatically
rewinds the film into the cassette
after the last exposure.
1. Wait for the film to completely
rewind into the film cassette.
• When the motor stops
running, the
FRAME
COUNTER
(28) will
indicate “0.”
2. Turn the
FILM
-
DOOR
LATCH
(2) to
open the
FILM
DOOR
(22).
3. Press the
DATE
-
SET
BUTTON
(8)
to change the “blinking” number(s).
4. Press the date-select button
to store the selected
number(s) and to activate the
next “blinking” number(s).
5. Follow steps 3 through 5 to
continue your selection, or to
end further options, press the
date-select button repeatedly
until the blinking stops.
SET
SELECT
DATE
To Next Page
Loading...
