20
1. Press the
ON
/
OFF
BUTTON
(20)
to turn the camera on and to
uncover the
LENS
(16).
2. Press the
FLASH
-
SELECT
BUTTON
(11) repeatedly until
the
AUTO
-
FLASH
(34) and
RED
-
EYE
-
REDUCTION
(26)
INDICATORS
appear on the
LCD
PANEL
(6).
• Disregard step 2 if the
default setting is already set
for red-eye reduction.
3. Frame your subject within the
VIEWFINDER
EYEPIECE
(19).
4. Have your subject look
directly at the
RED
-
EYE
-
REDUCTION
LAMP
(17).
5. Partially depress the
SHUTTER
BUTTON
(3). When the
FLASH
-
INDICATOR
LAMP
(18) glows
green, fully depress the
shutter button to take
the picture.
• In this mode there will be
a slight delay in the
shutter release.
Auto flash without
red-eye reduction
Use this mode for taking pictures
without people. You can change
the default setting to auto flash
without red-eye reduction by
following these steps:
AUTO
To Next Page
Loading...
Need help?
General
