Operation
Adding
Your
Slides
Remove the
lock
ring
by turning it counterclockwise and lifting it off.
6
Lock ring
~
Check each slide's orientation (horizontal or vertical), and arrange them
in
the order you wish to show them. Then turn the slides upside down.
Number each mount in the upper right-hand corner
of
the film's shiny side.
Insert your first slide into the first slot
in
the tray
so
that the number
is
visible on the outer circumference
of
the tray. Insert your second slide in
the second slot
with
the emulsion (dull side) facing your first slide, and
so
on .
KODAK CAROUSEL® Slide Projector
To Next Page
Loading...
