Operation
Loading
the
Slide
Tray
A KODAK CAROUSEL ® 140
SI
ide
Tray
is
designed to hold up to 140
slides.
Be
sure that your slide mounts
are
in good condition; frayed or bent
mounts may fail to drop into the projector. A variety
of
slide trays are
available
with
capacity up to 140 slides.
See
your dealer in Kodak products
for a complete list
of
Kodak trays
and
accessories.
Note:
Do
not attempt to project slides mounted
with
sticky or loose tape.
Place the tray over the center post
of
the projector. Align the "0" slot with
the gate index; the tray
will
drop into position.
If your
140-slide tray does not drop easily, secure the lock ring, invert the
tray, and align the
index hole with the index notch. Slide and hold the tray
release latch
in
the direction
of
the arrow, and turn the bottom plate until
the index hole and notch align. Then release the latch. If you
use
an
80-
slide tray, rotate the metal plate on the bottom
of
the tray until it locks into
position.
140-Slide
Tray
SO-Slide
Tray
KODAK CAROUSEL® Slide Projector
5
To Next Page
Loading...
