Maintenance
Projection
Lamps
To
ensure a long life and trouble-free operation for your projector:
•
Allow
the air to
flow
freely around the projector.
• Do not recirculate warm
air.
•
Keep
the projector dust free.
Your CAROUSEL Projector requires no lubrication; all bearings are self-
lubricating.
Included:
FHS
lamp, 70-hour lamp life (medium-brightness)
Sampling
of
other lamps:
EXY
(200 hours/
less
brightness)
EXR
(35
hours/maximum brightness)
Note:
An
EXW
lamp
is
not recommended for older models
of
CAROUSEL Projectors. Contact the Kodak Information Center
at
1-800-242-2424 in the
U.S.
or 1-800-465-6325 in Canada
if
you need help identifying your particular model.
Project Lamp Tips • Projector operation
on
line voltages above 125 volts
greatly reduces the lamp life .
• Unplug the projector before changing the lamp.
20
KODAK CAROUSEL® Slide Projector
To Next Page
Loading...
