Maintenance
Cleaning
the
Condenser,
Heat-Absorbing
Glass,
and
Mirror
22
To
clean the condenser, heat-absorbing gl
ass,
or mirror, you must
disassemble the lamp module.
Slide the power switch to
Off
a
nd
un
plug the projector.
All
ow
the projector to cool
about 10 minutes.
Push
the
lamp-module
release button
and remove the lamp module.
Use
a torx-head screwdriver to remove the screw.
Us
ing a flat-blade
sc
rewdriver, apply ample pressure
to release each
of
the metal tabs.
Lift off the top
of
the lamp modul
e.
KODAK CAROUSEL
'"
Slide Projector
To Next Page
Loading...
