Operation
Clearing
a
Gate
Jam
To
remove a defective slide
or
foreign object stuck in the projector gate,
you need to remove the tray :
• Slide the
tray release latch
in
the direction
of
the arrow, and
•
with
the other hand, I ift off the back
of
the tray.
With the lock ring firmly
in
place,
turn the 140-slide tray upside
down. Retract the
tray release latch
in the direction
of
the arrow and
al
ign the index hole with the index
notch.
(For
an
80-sl ide tray, rotate
the metal plate until it locks into
position.)
Put
the tray aside.
Remove the slide or object from the projector gate by pressing the forward
button or removing the slide manually.
Remount damaged slides to protect your projector and slides from subse-
quent damage.
KODAK CAROUSEL® Slide Projector
17
To Next Page
Loading...
