Troubleshooting
PROBLEM CAUSE
CORRECTION
SI
ide
fai
Is
to drop
Tray
base
plate not properly Align the index hole and
into projection indexed
index notch.
position
Tray
not properly positioned Reposition tray on projector.
on projector
Slide
mount
warped
or
Straighten mount
or
remount
frayed at corners
slide.
Projector not level
or
tilted
Set
projector on a stand
too high equal
with
center
of
screen.
Uneven Projection lamp not
fully
Check lamp.
illumination on
seated
screen
Condenser lens not installed
Check condenser lens.
or not positioned properly in
mount
Slide
mount
not seated Check slide position and
properly
in
projector gate slide-mount condition.
Projector
won't
Tray
not properly positioned
Reposition tray.
cycle to next slide
Slide or foreign object stuck
See
"Clearing a Gate Jam" on
in
gate
page 8.
KODAK
CAROUSEL
'"
Slide Projector
27
To Next Page
Loading...
