Accessories
for
Your KODAK Proiector
KODAK Slide
Trays
Round slide trays are an integral part
of
the superior Kodak slide projection
system. All are made with corrosive-
resistant materials a
nd
a high-quality
latching mechanism to ensure many
years
of
uninterrupted service. The
spill-proof design accommodates up
to 80 or 140 slides. A special feature
allows preconditioning that eliminates
popping and focus drift during
projection.
KODAK
CAROUSEL
® 140 Slide
Tray
CAT
899 5193
Black slide tray; accepts up
to
140
slides; for use with cardboard slide
mounr
sTrr6~incll(t
:-
6
I111l1.)
l
Traxrmum
thickness.
KODAK
CAROUSEL
® TRANSVUE
80 Slide
Tray
CAT
1046093
Translucent gray slide tray; accepts
up
to
80 slides; for use with cardboard
slide mounts 11l0-inch (2.5 mm)
maximum thickness.
KODAK
EKTAGRAPHIC
Universal
Slide
Tray,
Model
2
CAT
144 3266
Black slide tray; accepts up
to
80
slides; for use with glass, plastic, or
cardboard slide mounts
of
lI8-inch
(3.2 mm) maximum thickness.
KODAK
EKTAPRO
80 Slide
Tray
CAT
121 8080
Black, clear-covered slide tray;
accepts
up
to 80 slides; for use with
glass, plastic or cardboard slide
mounts 1I8-inch (3.2 mm) maximum
thickness.
KODAK
EC
Stack
Loader
CAT
1514249
Lets you project and edit up to forty
2 x 2-inch slides
in
cardboard or very
thin plastic mounts (or up
to
thirty
110 slides
in
2 x 2-inch adapters)
without loading them into a tray.
KODAK Slide Projection
Lenses
(8)
When selecting a lens, Eastman
Kodak Company recommends the
use
of
a flat-field lens for general
projection. Keep
in
mind that
cardboard open mounts, produced
by
an
automated photofinisher such as
Kodalux, work best with a curved-
field lens.
If
using glass or plastic
meunts, a nat-fi
lti
-l
e-ns
- i
-s-
a beHer
choice.
If
using a mix
of
mounts, a
flat-field lens
is
also suggested.
Flat Field
KODAK Slide Projection FF Lens:
85
mm CA T 712 5503
100 mm
CAT
1634500
180
mm
CAT
712 5529
75
to
120 mm
CAT
847 0346
100
to
150 mm CAT 143 3432
100
to
200
mm
CAT 712 5743
Curved Field
KODAK Slide Projection CF Lens:
102
mm
CAT
1782382
102
to
152 mm
CAT
1414457
...
KODAK Remote Controls
KODAK
SP
Laser
Remote
CAT
817 3338
The KODAK SP Laser Remote
is
an
IR remote control for use with any
Kodak slide projector equipped with
either a KODAK EKTAGRAPHIC
IR Remote Control receiver or a
KODAK EKT ALITE IR Remote
Control receiver. The battery-
operated laser remote produces a
superior beam brightness and controls
slide projector operations up to
100 feet.
KODAK
SP
Laser
Remote
with
Receiver
CAT
830 0279
For use with KODAK
EKT AGRAPHIC and CAROUSEL
Projectors; a KODAK
EKT AGRAPHIC IR Remote Control
receiver
is
packaged with the SP
Laser Remote. The receiver plugs
into a standard slide projector 5-pin
remote accessory connector.
KODAK
EKTAGRAPHIC
IR
Remote
Control
CAT
1098383
Wireless IR Remote Control for
forward, reverse, and remote focus
operations. It
is
compatible with any
5-pin connected KODAK
EKT AGRAPHIC Remote Control
receiver.
To
order
any
of
these accessories, see your dealer in Kodak audiovisual products,
or
call
Kodak
in the U.S.
at
1-800-242-2424,
or
in
Canada
at
1-800-465-6325.
To Next Page
Loading...
