Taking pictures and videos
9
Using the camera screen as a viewfinder
IMPORTANT:
The Liveview feature significantly depletes battery power; use it
sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera
screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button to take the picture.
5 To turn off the camera screen, press the OK
button.
To make the camera screen turn on whenever the camera is on, see Liveview,
page 14.
Reviewing the picture or video just taken
After you take a picture or video, the camera screen displays a Quickview for
approximately 5 seconds. While the picture or video is displayed, you can:
■ Review: If you take no action, the picture/video is saved.
■ Play (video): Press the OK button to play the video.
■ Share: Press the Share button to tag a picture/video for email, or as a
Favorite, or to tag a picture for print (see page 24).
■ Delete: Press the Delete button while the picture/video and are
displayed. Follow the prompts to delete the picture.
Using digital zoom
Use digital zoom in any Still mode to get up to 3X closer to your subject.
IMPORTANT:
You may notice a decrease in printed image quality when using
digital zoom.
1 Press the OK button to turn on the camera screen, then press to activate
digital zoom.
The camera screen displays the zoomed image, the zoom value, and the digital
zoom icon .
OK button
To Next Page
Loading...
Need help?
General
