Taking pictures and videos
10
2 Press to zoom in or out, in 0.1X increments.
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting, press .
NOTE: You cannot use digital zoom for video recording.
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. Flash is effective between 2.6 - 7.9 ft (0.8 - 2.4 m). You can only
change the flash setting in Still modes.
Choosing a flash option
Press the button repeatedly to scroll
through the flash options.
The active flash icon is displayed in the
camera screen status area (see page 6).
NOTE:
■ Off and Fill flash options revert to Auto when the camera is turned
off.
■ When the picture is taken with Auto or Fill flash selected, the camera
flashes twice: once to set the exposure and once to take the picture.
When the picture is taken with Red-eye flash selected, the camera
flashes three times: once to set the exposure, once to reduce red-eye,
and once to take the picture.
Flash setting
Flash/Status button
Auto—flash fires when the lighting
conditions require it.
Fill—flash fires every time you take a
picture, regardless of the lighting
conditions. Use when the subject is in
shadow or is "backlit" (when the sun is
behind the subject).
Red-eye—flash fires so the subject’s
eyes become accustomed to the flash,
then fires again when the picture is
taken.
Off—flash never fires.
To Next Page
Loading...
Need help?
General
