Taking pictures and videos
14 www.kodak.com/go/support
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. You can change the flash setting in any Still mode; the default flash
setting is restored when you exit the mode or turn off the camera.
Turning on the flash
Flash Range
Wide Angle 2–11.8 ft (0.6–3.6 m)
Telephoto 2–6.9 ft (0.6–2.1 m)
Flash Mode Flash Fires
Auto
Flash
When the lighting conditions require it.
Off Never
Fill Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit”
(when bright light is behind the subject).
Red-eye Once, so the subject’s eyes become accustomed to the flash,
then fires again when the picture is taken. (If the lighting
conditions require flash but do not require Red-eye reduction,
the flash may fire only once.)
Press the
Flash/status button
through the flash options.
The active flash icon is displayed
in the camera screen status area.
button to scroll
To Next Page
Loading...
Need help?
General
