Getting started
2 www.kodak.com/go/support
Loading the batteries
For information on replacing batteries and extending battery life, see page 3.
1 Turn the Mode dial to Off.
2 On the bottom of the camera, slide the battery
door and lift to open.
3 Insert the AA batteries as shown.
4 Close the battery door.
Insert the Kodak EasyShare Ni-MH
rechargeable battery pack (included with the
Kodak EasyShare camera dock or printer dock)
as shown.
Insert the Kodak the CRV3 lithium battery
(non-rechargeable) as shown.
See page 3 for the other types of batteries you
can use in your camera.
To Next Page
Loading...
