3
1
Checking Batteries
So that you are never caught with dead batteries, your camera indicates the power
level of the batteries, in the form of a battery status symbol, on the Status Display
when you turn on the camera.
For information on guidelines for battery usage, see page 91.
1 Set the Mode dial to Capture, Review, or
Camera Settings.
The battery status symbol is not visible if you
set the camera to Connect.
2 Slide the POWER switch to the right to turn on
the camera.
3 Check the battery status symbol that appears in
the Status Display.
q
Full (No Icon)—indicates that batteries are
charged and ready to use.
q
Low—indicates batteries are not fully
charged and will soon need to be replaced or
recharged.
q
Exhausted (blinking)—indicates batteries
are too weak to power the camera and need
to be replaced.
To Next Page
Loading...
Need help?
General
