13
2
Viewing the Picture Just Taken
You can view a picture seconds after it is taken with a touch of a button. It is a
handy way to check if your subject was positioned correctly.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to turn
on the camera.
3 Press the SHUTTER button to take a picture.
4 Press the button.
The picture just taken appears in the LCD
for several seconds with the delete icon
above the button.
If you want to view the picture again, press
the button.
5 To delete the picture on the LCD, press the
button.
The LCD displays the Delete Picture screen.
6 Press a button until YES
is highlighted.
7 Press the DO-IT button.
The picture is permanently deleted from the
camera memory card.
/
To Next Page
Loading...
Need help?
General
