53
5
Setting an Exposure Compensation Default
Adjust the Exposure Compensation setting so that it is used every time you turn
on the camera. For more information about The Exposure Compensation feature,
see page 22.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to turn
on the camera.
The main Camera Setup screen appears.
3 Press a button until the icon is
highlighted.
4 Press the DO-IT button.
The Exposure Compensation Default
screen appears.
5 Press a button until the exposure
compensation number you want
is highlighted.
If your pictures are too dark, increase (+) the
exposure number.
If your pictures are too light, decrease (-) the
exposure number.
The main default setting for Exposure
Compensation is 0.0.
6 Press the DO-IT button to accept the changes
and return to the main Camera Setup screen.
To Next Page
Loading...
