60
Installing the Software
While the Installer is automatically loading your software, take a few minutes to
fill out and send in the camera product registration card. This allows you to
receive information regarding software updates and registers some of the
products included with the camera.
1 Close all other software programs before starting the Installer.
2 Place the Installer CD into the CD-ROM drive.
3 Load the software.
On a Windows-based computer—if Auto Play is enabled, the first install
window automatically appears. If the first install window does not
automatically appear, choose Run from the Start menu. In the Run dialog box,
type the drive letter that contains the CD and type \setup.exe. For example:
d:\setup.exe
On a Macintosh computer— the first install window automatically appears.
4 Follow the on-screen instructions to install the software.
5 If prompted, restart the computer when the software installation
is complete.
Detailed information on all the KODAK software is included in the online help
for each application.
To Next Page
Loading...
Need help?
General
