6
Setting the Clock on Your Camera
Your camera has a built-in clock that maintains the date and time in a
24-hour format. The camera clock needs to be set if you plan to use the Date
Stamp feature, which imprints the date on your picture. For
information on using the Date Stamp feature, see page 19.
If you remove the batteries from the camera for an extended period of time, or the
batteries become exhausted, you may need to reset the clock.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to turn
on the camera.
The main Camera Setup screen appears.
3 Press a button until the icon
is highlighted.
4 Press the DO-IT button.
The Date/Time screen appears.
5 Press a buttons to adjust the
date and time fields.
6 Press the DO-IT button.
The camera accepts the setting and returns to
the main Camera Setup screen.
/
/
To Next Page
Loading...
Need help?
General
