Kodak DC5000 - Page 82

74
Camera
Problem Cause Solution
SHUTTER button does not
work.
Camera is not turned
on.
Turn on the camera.
See page 2.
Mode dial is not set to
Capture.
Set the Mode dial to
Capture.
Ready light is
blinking. Camera is
processing picture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
The Status Display
reads Full. The
camera memory card
is full.
Transfer pictures to
your computer, delete
pictures on the card
(see page 39), or insert
a card with available
memory
(see page 5).
Camera does not turn on. Batteries are not
properly installed.
Remove and reinstall
the batteries. See page
2.
Batteries are low or
dead.
Batteries need to be
replaced (see page 2),
or recharged (see page
3). Also, you could
use an AC adapter.