Need help?Do you have a question about the Kodak E1040 Series and is the answer not in the manual?
Safety guidelines for scanner operation and placement.
Steps for safely removing the scanner and its contents from the packaging.
Instructions for initial scanner setup and connection to power.
Guide on downloading and installing the necessary scanner driver software.
Overview of fundamental scanning operations and controls.
Steps to prepare the scanner for scanning, including adjusting guides and trays.
Provides guidance on common paper feeding issues and their resolutions.
Provides best practices for preparing documents to ensure smooth feeding.
Explains what multifeeds are and how to resolve them.
Describes paper jam occurrences and how to clear them.
General guidance and reasons for periodic scanner cleaning.
Instructions for using a transport cleaning sheet to clean rollers.
Detailed steps for removing and cleaning the separation roller.
Step-by-step instructions for cleaning the feed rollers and urging roller.
Guide on how to clean the internal transport rollers.
Instructions for cleaning the scanner's imaging glass and area.
General advice on when and how to replace scanner consumables like roller modules.
Detailed instructions for replacing the separation roller assembly.
Steps for removing and installing a new pre-separation pad.
Instructions for replacing the tire on the urging roller.
Steps for removing and replacing the tires on the feed rollers.
Resources and links for solving common scanner issues.
To Next Page
General
