Doing more with your camera
www.kodak.com/go/support
25
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press to highlight Loop, then press the OK button.
2 Press to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. The Loop feature remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 35). The slide show stops if you
connect or disconnect the cable while the slide show is running.
1 Connect an audio/video cable from the camera USB, A/V Out port to the television
video-in port (yellow) and audio-in port (white). See your television user’s guide for
details.
2 Review pictures and videos on the television.
To Next Page
Loading...
Need help?
General
