30 www.kodak.com/go/support
Doing more with your camera
NOTE: ISO speed changes depending on whether flash is on or off.
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button. (Some settings are unavailable in some modes.)
2 Press to highlight the setting you wish to change, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Backlight Subjects that are in
shadow or “backlit”
(when light is behind
the subject).
f/2.7–f/4.6, Multi-Zone Focus, Fill-Flash,
ISO 80
Setting Icon Options
Exposure Compensation
(Still mode)
Choose how much light
enters the camera.
This setting remains until you
turn the Mode dial.
If pictures are too light, decrease the value.
If pictures are too dark, increase the value.
NOTE: When the camera screen is on in any Still capture
mode, press to adjust exposure
compensation.
Exposure Compensation returns to zero if Long Time
Exposure is set.
Unavailable in Video mode.
Use this SCN mode For Camera pre-settings
To Next Page
Loading...
Need help?
General
