30 www.kodak.com/go/support
Doing more with your camera
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display
interval from 3 to 60 seconds.
1 On the Slide Show menu, press to highlight Interval, then press the OK
button.
2 Select a display interval.
To scroll through the seconds quickly, press and hold .
3 Press the OK button.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press to highlight Loop, then press the OK button.
2 Press to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. The Loop feature remains until you change it.
Displaying pictures and videos on a television
You can display pictures/videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see Video Out on page 27). The slide
show stops if you connect a cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera USB, A/V Out port to
the television video-in port (yellow) and audio-in port (white). See your television
user’s guide for details.
2 Review pictures/videos on the television.
Downloaded From camera-usermanual.com Kodak Manuals
To Next Page
Loading...
Need help?
General
