5
Chapter 1
Checking the Battery Level
Check the battery power level before taking pictures. For guidelines on battery
usage, see page 62.
1 Turn the camera on.
2 Check the battery status symbol that appears on the LCD.
Full —batteries have adequate power.
Low —batteries need to be replaced or recharged soon.
Exhausted (blinking) —batteries are too weak to power the
camera. Replace or recharge the batteries.
When the batteries are exhausted, the ready light blinks red for 5 seconds,
then the camera turns off.
IMPORTANT BATTERY INFORMATION
For acceptable battery life and dependable operation, do not use
alkaline batteries.
These activities can shorten battery life:
m Using the LCD as the viewfinder (see page 12)
m Reviewing your pictures on the LCD (see page 13)
m Excessive use of the flash
NOTE: If you are using a KODAK EASYSHARE Camera Dock, keep your camera
docked there for constant Battery Pack charging. For details on using
the EASYSHARE Camera Dock, see page 39.
To Next Page
Loading...
