Kodak EASYSHARE DX3215

33
Chapter 6
6 Transferring Pictures To
Your Computer
Before You Transfer Pictures
Before you connect your camera and transfer pictures, make sure you
have installed the software from the KODAK Picture Software CD (see
page 30).
Connecting to Your Computer
You can transfer your pictures from your camera to your computer using
either the provided USB cable or the optional KODAK EASYSHARE Camera
Dock.
Connecting With the USB Cable
1 Turn the camera off.
2 Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
If the port is not labeled, see your computer
User’s Guide.
3 Plug the other end of the USB cable into the
labeled USB port on the camera.
4 Turn the camera on.