Kodak EASYSHARE DX3700

43
Chapter 7
Transferring Pictures
To transfer pictures from the camera to the computer:
1 Dock the camera in the EASYSHARE Camera
Dock.
2 Press the Connect button.
m The Dock light blinks green while the
connection to the computer is active.
m KODAK Picture Transfer Software automatically opens on the computer and
pictures are transferred. You can also transfer pictures manually while the
green light is blinking (page 36).
m Then, KODAK Picture Software opens so you can work with pictures on the
computer.
NOTE: When pictures are transferred, leave the camera in the EASYSHARE
Camera Dock. Eight minutes after the transfer is complete, the Dock
monitors battery power and charges whenever necessary.
Using a Tripod
A tripod provides stability. Connect a tripod directly to the camera tripod
socket, rather than through the Dock.
The camera tripod socket is located on the
bottom of the camera.
Tripod socket