50
Chapter 8
Camera Ready Light
Problem Cause Solution
Ready light does not
turn on and the
camera does not
work.
Camera is not turned
on.
Turn the camera on
(page 4).
Batteries are
exhausted.
Replace the batteries
(page 3) or recharge the
Battery Pack.
Ready light blinks red. Batteries are low. Replace the batteries
(page 3) or recharge the
Battery Pack.
Ready light glows
steady red.
Camera’s internal
memory or MMC/SD
card is full.
Transfer pictures to your
computer (page 33), delete
pictures from the camera
(page 18), or insert a card
with available memory.
Ready light blinks
green.
Picture is being
processed and saved
to the camera.
Wait. Resume picture taking
when the light stops blinking.
Auto Exposure is not
locked.
Release the shutter button
and recompose the picture.
Ready light alternates
orange and green.
Flash is not charged. Wait. Resume picture taking
when the light stops blinking
and glows green.
To Next Page
Loading...
