Taking pictures and videos
www.kodak.com/go/support
7
Using the auto-focus framing marks (pictures)
When using the EVF/LCD screen as a viewfinder, framing marks indicate where the
camera is focusing. For the best pictures, the camera attempts to focus on foreground
subjects, even if the subjects are not centered in the scene.
1 Press the Shutter button halfway. When the framing marks turn green, focus is
accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape, Night Landscape, Fireworks, or Video mode. When you
use AF Zone (page 51) and set Center Zone, the framing marks are fixed at Center Wide.
Framing marks
To Next Page
Loading...
