Getting started
www.kodak.com/go/support
6
Loading paper
1 Remove the paper tray from the printer dock if installed (see page 7).
2 From the closed position, slide the paper tray cover
back, about 3 in. (8 cm) to the second "click". This
is the fully open, or paper loading position.
3 Carefully "fan" the paper to keep the sheets from
sticking together.
IMPORTANT:
Do not load more than 25 sheets of paper.
Use the upper limit line inside the paper
tray as a guide to prevent overloading.
Do not load paper that is missing
perforated tabs.
4 Load the paper into the paper tray, with the Kodak
logo side facing down.
To Next Page
Loading...
