Kodak EasyShare Printer Dock Plus Series 3 User Manual

Printing without a computer
www.kodak.com/go/support
14
Printing from a Kodak card reader
Your printer dock is compatible with the Kodak 8-in-1 card reader (sold separately).
Other Kodak USB card readers may work with your printer dock; however, other
manufacturers’ card readers are not supported.
1 Open the accessory door on the printer dock.
2 Plug the USB connector from the card reader into
the USB device connector located on the side of the
printer dock.
3 Insert the memory card into the card reader (see your card reader user’s guide for
details). Do not insert more than one card at a time.
■ To print the current picture, press the Print button, .
NOTE: If the memory card contains pictures tagged for printing, instead of printing the current picture,
all tagged pictures are printed (see page 15).
IMPORTANT: To avoid paper misfeeds or jams, wait until printing is complete before
removing paper, the paper tray, the color cartridge, or the camera.
■ To exit without printing, press the Cancel button, .
Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or
visit www.kodak.com/go/accessories.

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office