Kodak EasyShare Printer Dock Plus Series 3 User Manual

www.kodak.com/go/support 12
3 Printing without a computer
Printing from your digital camera
1 Take a picture with your camera (see your camera user’s guide).
2 Place the camera on the printer dock (see page 8).
The current or most recent picture appears on the camera screen.
■ To print the current picture, press the Print button, .
NOTE: If the camera or installed memory card contains pictures tagged for printing, instead of printing
the current picture, all tagged pictures are printed (see page 15).
■ To review and choose pictures to print, press the Left/Right control on the
printer dock, . For each picture you want to print, press to select
the number of copies. When finished with your selections, press the Print
button, .
The Print light blinks, and printing starts.The paper
cycles four times before it is ejected. The first three
passes apply layers of yellow, magenta, and cyan colors
to the print, and the fourth pass applies the Kodak
XtraLife
TM
coating that protects and preserves the
image.
IMPORTANT: To avoid paper misfeeds or jams, wait until
printing is complete before removing
paper, the paper tray, the color cartridge, or
the camera.
■ To exit without printing, press the Cancel
button, .

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office