Kodak EasyShare Printer Dock Plus Series 3 User Manual

59 www.kodak.com/go/support
Troubleshooting
Paper light
Light status Cause Action/solution
IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to
remove the cartridge without first clearing the paper error. Make sure the Paper
light is off before attempting to remove the cartridge.
Light is off The paper tray is properly installed and
has an ample supply of paper.
None required.
Light blinks red There is a paper jam. Clear the jam (page 49), then
press .
Printing stopped during mid-print; the
paper may be damaged or is missing
removable tabs (page 50).
Remove loose paper. Check the
paper supply. Reload with new
paper if necessary, then press .
Light glows
steady red
The paper tray is empty. Load paper (page 6), then press .
The paper tray is not installed or is
improperly installed.
Remove the paper tray, check that
paper is properly loaded, and
re-install (page 7). Press to
resume printing.
Paper did not feed; removable tabs may
be missing or sheets may be stuck
together (page 48).
Check the paper supply. Reload
with new paper if necessary, then
press .
The paper feed roller may be dirty. Clean the paper feed roller
(page 46).

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office