Kodak EasyShare Printer Dock Plus Series 3 User Manual

Troubleshooting
www.kodak.com/go/support
64
Print button/light
Light status Cause Action/solution
Light glows steady
green
The printer dock is ready for
printing.
None required.
Light blinks green The printer dock is printing.
Light is off There are no pictures in the
camera or on the memory card.
None required.
To enable Print:
1 Take pictures.
2 Dock the camera or connect a
compatible Kodak card reader
(page 14). If using a card
reader, make sure a memory
card is inserted.
The camera is not docked or a
compatible Kodak card reader is
not connected.
The camera is not properly seated
on the connector.
Reseat the camera on the printer
dock (page 8).
The camera or card reader is
transferring pictures to the
computer, or has established an
active connection to the
computer.
None required.
When transfer is complete, press
the blinking Transfer button, .
A PictBridge compatible camera
or device is connected.
None required.
The Print button is disabled; print
command is controlled from the
PictBridge compatible camera or
device. To print from another
source, unplug the PictBridge
compatible camera or device.

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office